Publications / 2024 Proceedings of the 41st ISARC, Lille, France

A Generic 3D Printing Life Cycle Assessment (LCA) Framework for AEC Applications

Bharadwaj R. K. Mantha, Ala Sati, Fatma Hosny, Mohamed Abdallah, Saleh Abu Dabous
Pages 1263-1271 (2024 Proceedings of the 41st ISARC, Lille, France, ISBN 978-0-6458322-1-1, ISSN 2413-5844)
Abstract:

Amidst the increasing adoption of three-dimensional printing (3DP) in the architecture, engineering, and construction (AEC) industry, there exists a notable research gap concerning the quantification of its environmental impact. More importantly, there is a lack of a generic framework that can be employed for different material types and methods. Therefore, this research aims to develop a generic 3DP life cycle assessment (LCA) framework pertaining to the AEC industry. To substantiate the viability of the proposed framework, a meticulous case study was conducted. Focused on the LCA of a concrete 3DP process employed in constructing a two-story residential villa in the United Arab Emirates (UAE), the case study employed the contour crafting 3DP technique. A detailed cradle-to-construction LCA was executed using a functional unit of 1m3. Data compilation involved synthesizing information from literature sources and utilizing DesignBuilder™ software. The embodied carbon analysis of the case study yielded insightful results, indicating that the contour crafting technique emitted approximately 103,135 kg of carbon. Significantly, concrete emerged as the predominant construction material, contributing approximately 52% to the total equivalent over the various life cycle stages. Future work warrants further investigation into the mitigation measures to enhance the environmental performance of 3DP within the AEC industry. Additionally, the research encourages the exploration of alternative 3DP construction techniques and diverse project types, thereby broadening the applicability of the developed framework. This research provides a foundation for more sustainable practices and fosters further exploration of the 3DP implementation within the AEC industry.

Keywords: 3D printing, LCA, Construction industry, Embodied carbon;